Oki MC363dn Manual de usuario descargar pdf (Pagina 30)

Paper recommendations > 30

APER

RECOMMENDATIONS

Your MFP will handle a variety of print media, including a range of paper weights and sizes.

This section provides general advice on choice of media, and explains how to use each type.

The best performance will be obtained when using standard 75~90g/m² paper designed

for use in copiers and laser printers.

Use of heavily embossed or very rough textured paper is not recommended.

Pre-printed stationery can be used, but the ink must not offset when exposed to the high

fuser temperatures used in the printing process.

Envelopes

Labels

CAUTION!

Envelopes should be free from twist, curl or other deformations.

They should also be of the rectangular flap type, with glue that

remains intact when subjected to hot roll pressure fusing used in

this type of printer. Window envelopes are not suitable.

CAUTION!

Labels should also be of the type recommended for use in copiers

and laser printers, in which the base carrier page is entirely

covered by labels. Other types of label stock may damage the

printer due to the labels peeling off during the printing process.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 145 146

Sin comentarios

Oki MC363dn Manual de usuario Pagina 30