OKI 7300e Manual de usuario descargar pdf (Pagina 116)

UNIX 115

Operating system configuration

This section explains how to configure a printer for major UNIX

operating systems.

Sun OS 4.x.x (BSD) configuration

The following explanation uses Sun OS 4.1.3 and a C7400 printer as

examples. The absolute path of commands and the configuration

method may differ between OS versions, so refer to the workstation

manuals for more information.

If an incorrect IP Address, Subnet Mask or Gateway is entered, the

network may go down or other damage may occur. Check the address

with the network manager and confirm that the IP address of the

printer has been set.

1. Login as [root[ to the workstation.

If you do not have Superuser rights, the network manager should

conduct the configuration.

2. Register the IP address of the network card and the host name in

the /etc/hosts file.

Example: for IP address 192.168.20.127 and host name C7400

192.168.20.127 C7400

3. Use the ping command to confirm connection with the network

card.

Example: for host name C7400

# ping C7400

If there is no reply, then there is a problem with the configuration of

the IP address (the IP address has been already set manually or

DHCP/RARP server may run) or with the network. Reset the network

interface card settings to their defaults and then try to set a temporary

IP address. If you still have the problem after resetting the network

interface card, consult the network manager.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 140 141

Sin comentarios

OKI 7300e Manual de usuario Pagina 116