Oki 58374501 Manual de usuario descargar pdf (Pagina 8)

12. Secure the stacker with four screws.

13. Push the finisher against the printer until the

prongs on the printer brackets fit into the

holes in the finisher.

Note:

If you need to, turn the levellers (

) on

either side of the finisher to raise or

lower it so the holes and prongs align

properly. Make sure the finisher is level.

Step 5: Make Connections

1. Connect the finisher’s cable to the inverter

(

). Use the cable supplied to connect the

inverter to the printer (

2. Plug the power cord supplied into the

inverter, then connect it to a suitable

grounded outlet.

3. Reconnect the printer’s interface cable.

4. Plug in the printer’s power cord and turn on

the printer.

Note:

When the printer is turned on, power

is supplied to both the printer and the

finisher.

58374501

1 2 3 4 5 6 7 8

Sin comentarios

Oki 58374501 Manual de usuario Pagina 8