OKI 70040901 Manual de usuario

Memory DIMM Installation InstructionsDIMM PART NUMBER64MB: 70040901128MB: 70041101256 MB: 70041201512 MB: 70041901

9Check for Proper InstallationGenerate a MenuMap printout and check to be sure that the DIMMs are properly installed.1. Press MENU once or twice until

10Change the Memory Setting in the Driver(s)Windows® Adobe® PostScript® Driver1. Click Start — Settings — Printers. The Printers dialog box opens.2.

11Macintosh® Driver (OSX)1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable. Macintosh® D

12Limited WarrantyOki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect in material and workmanship and will remedy any such

13WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states do not allow limitations on how long an implied warranty lasts, so the above limitatio

14Oki Data Service Depot InformationUNITED STATESOki Data Americas, Inc.2020 Bishops Gate Blvd.Mt Laurel, NJ 08054Tel: 1-800-654-3282 Fax: 1-856-222-5

15Oki Data Americas, Inc.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (800) 654-3282FAX: (856) 222-5320http://www.okidata.comDIMM Install Guid

1Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility

2Getting StartedThe printers have four sockets for memory DIMM boards. You can expand the printer’s memory up to 1 GB by installing two 512-MB DIMMs.

3Prepare the Printer1. Turn off the printer and unplug the power cord.2. Detach the interface cable from the printer.3. Remove and save the thumbscrew

44. Grasp the control board, loosen it by wiggling it back and forth, and slide it out of the printer.C7100/C7300/C7500C9300/C9500

5Install the DIMM(s)1. Locate the DIMM sockets (circled) on the control board. 2. Push out the white lock tabs at either end of the DIMM socket.Cautio

63. Remove the DIMM from its shipping package.4. Align the DIMM with the narrow strip (1) on its metallic contact edge toward the front of the control

7Complete the Installation1. Align the bottom of the control board with the track in the printer and slide it back into place.C7100/C7300/C7500C9300/C

82. Reinstall the thumbscrews at the top and bottom of the board.3. Reattach the computer interface cable.4. Plug the power cord into the power outlet