Oki 70037301 Manual de usuario

OKI 70037301Hard Disk DriveInstallationInstructions

10Activate the Hard Disk inthe DriverWindows® PCL Driver1 Click Start Settings Printers.The Printers dialog box opens.2 Right click the OKI PCL dr

113 Change the setting:Windows 2000 and NT 4.0:a Click the Device Settings tab.b Scroll down to Installable Options andclick Hard Disk.c Under Change

12Limited Warranty:United StatesOki Data Americas, Inc. (Oki Data) warrants thisOPTION to be free from defect in material andworkmanship and will reme

13This Limited Warranty shall not apply if theproduct has been damaged due to abuse, misuse,misapplication, accident, or as a result of serviceor modi

14Some states do not allow the exclusion orlimitation of incidental or consequentialdamages, so the above exclusion may not applyto you.Additional inf

15Oki Data Service Depot InformationUNITED STATESOki Data Americas, Inc.2020 Bishops Gate Blvd.Mt Laurel, NJ 08054Tel: 1-800-654-3282 Fax: 1-856-222-5

Oki Data Americas, Inc.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (800) 654-3282FAX: (856) 222-5320http://www.okidata.com58346702

2Every effort has been made to ensure that the infor-mationin this document is complete, accurate, and up-to-date.Oki Data assumes no responsibility f

3Prepare The Printer1 Turn the printer off and unplug the powercord.2 Detach the interface cable from the back ofthe printer.3 Remove and save the thu

44 Grasp the control board and loosen it bywiggling it back and forth, then slide it out ofthe printer.C7000 SeriesC9000 Series

5Install the Hard DiskDrive (HDD)1 Locate the drive connector (1) on the controlboard:2 Remove the HDD from its shipping package.

63 Lift the handle on the HDD and lower it ontothe control board.4 Insert the board firmly into the connector andpress down on the handle to lock it i

7Complete the Installation1 Align the bottom of the control board with thetrack in the printer and slide it back into place.C7000 SeriesC9000 Series

82 Reinstall the screws at the top and bottom ofthe board.C7000 Series C9000 Series3 Reattach the interface cable, then plug thepower cord into the po

9Check for ProperInstallation1 On the printer control panel, press MENUonce or twice until INFORMATION MENUappears on the display.2 Press SELECT.PRINT